wp22 wp9 alloy steel pipe fittings tee

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

The ASTM A403 WP316L grade is a wrought carbon grade that possesses excellent toughness and offers higher creep and stress rupture properties.

Street elbows can also be used in tight spaces where conventional elbows cannot be easily installed. These elbows are available with a 90-degree bend angle, but are also available in 45 and 22.5 degrees. These Alloy 800 fittings are commonly used in sewers, drains, vents, gas pipes and more.

In these standard Grade WPB is the most common material used for medium and high temperature pipelines. W means weldable, P means pressure, B is grade b, refer to the minimum yield strength.

ASTM A815 Pipe Fittings, ASTM A815 Super Duplex 2507 Pipe Fittings, UNS S32750 Super Duplex Pipe Fittings, ASTM A815 32205 Seamless Pipe Fittings, ASTM A815 S32950 Butt weld Fittings, ASTM A815 Super Duplex S32760 Pipe Fittings Exporter.

More than a hundred years of development have allowed nickel alloys to have a wide range of applications and strengths, and have produced many forms. We offer Inconel, Monel and Incolloy alloys for everyday use and high stress industrial, energy or chemical environments.

In addition to heat resistance, Hastelloy Buttweld Fittings have high resistance to corrosion, pressure and oxidation. Hastelloy pipe fittings also have excellent mechanical properties and are often used in the chemical and aerospace industries.

Typical application for MONEL K500 which takes advantage of high strength and corrosion resistance are pump shafts, impellers, propeller shafts, valve components for ships and offshore drilling towers, bolting, oil well drill collars and instrumentation components for oil and gas production. It is particularly well suited for centrifugal pumps in the marine industry because of its high strength and low corrosion rates in high-velocity seawater.

Grade 310S Stainless Steel Butt Weld Pipe Fitting contains low Carbon, with higher Nickel and Chromium content curbing Hydrogen sulphide attack, which used in various industries like heat exchangers, furnace parts, shipbuilding, heat treatment baskets, condensers, offshore etc.
The fittings are shaped up and then heated to a high temperature following a rapid cooling closer to the cooling in still air. This rapid cooling adds to the strength of the Stainless Steel 310 Pipe Fittings and makes them much stronger. The SS 310S Fitting is used in industries like the sea water processing, thermal energy generation plants and much domestic piping as well. 310S SS Weld Fittings is used in different pressure classes to cope up with the pressure containment requirement of the application as well.

Used in chemical and petroleum processing, in power plants for superheater and reheater tubing, in industrial furnaces, and for heat treating equipment.

We are also a supplier and exporter of tees such as ASME A182 Duplex Steel S31803/S32205, which crosses the word with hydrogen sulfide, the leading culprit in causing sulfide corrosion cracking in sour service. We have the widest stock of Duplex ASTM A815 Fittings such as Duplex S31803 Tee, Duplex S32205 Stub End, S32205 Double End Cap, Duplex 2205 Reducer, Duplex Cross, Duplex steel S31803 elbow, etc.

Pipe Fittings are available in various forms like Elbow Fittings, Return Bend Fittings, Cross Pipe Fittings, Cap Pipe Fittings, Tee Pipe Fittings, Stub End Pipe Fittings, Reducer Pipe Fittings, and Coupling Pipe Fittings. Each of these forms has their own role to play as pipe fittings but with common intent of enhancing the pipe utility in various conditions.

We have a massive stock of Super Duplex WPS 32750 Tee, known for its high ductility, and its excellent corrosion resistive nature makes it an excellent option for marine applications.

This fitting is used in piping systems to change direction or function and is mechanically connected to the system. The easiest way to do this is to bend the pipe in the desired direction, but this process will stretch and thin the outer wall of the pipe while thickening and wrinkling the inner wall of the pipe. Our 2205 line of duplex fittings includes long radius elbows and short radius elbows.

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

Our ASTM A815 Duplex Steel UNS S32205 Caps are available in a variety of cap shapes, diameters and thread types and are resistant to many industrial acids and seawater.

Our Carbon Steel Butt Welded Pipe Elbow is a carbon steel pipe solution made of forged carbon steel and is mainly used in the high temperature service range.

These elbows provide good service in harsh environments. The elbow is used to change the flow direction of the medium by 30 degrees.

Stainless steel reducer tee is widely used in the construction and overhaul of petrochemical, petroleum, liquefied gas, chemical fertilizer, power plant, nuclear power plant, shipbuilding, papermaking, pharmaceutical, food sanitation, urban construction and other industries.

Material is generally 10# 20# A3 Q235A 20g 16Mn ASTM A234 ASTM A105 ASTMA403, tee, outside diameter range of 2.5 “-60”, from 26 “-60” for welding tee.Wall thickness of 28-60 mm.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The alloy has great mechanical properties at subzero temperatures.For catering to the needs of our customers better, it is essential that we manufacture Monel Pipe Fittings in different types, with each one serving some specific purpose.

Of all the duplex steel categories, standard duplex steels are the most widely used alloys. As a cost-effective alternative to nickel-rich alloys, duplex fittings offer moderate performance. However, the mechanical properties of duplex steels are much higher compared to austenitic alloys such as 304.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance to a wide range of media.

Stainless steel is an alloy of iron that is resistant to rusting and corrosion. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen
Completely and infinitely recyclable, stainless steel is the ¡°green material¡± par excellence. In fact, within the construction sector, its actual recovery rate is close to 100%.
Stainless steel is also environmentally neutral and inert, and its longevity ensures it meets the needs of sustainable construction. Furthermore, it does not leach compounds that could modify its composition when in contact with elements like water.
Stainless steel must contain at least 10.5 percent chromium. Depending on the grade, it may contain much higher chromium levels, and additional alloying ingredients like molybdenum, nickel, titanium, aluminum, copper, nitrogen, phosphorous or selenium.
In addition to these environmental benefits, stainless steel is also aesthetically appealing, extremely hygienic, easy to maintain, highly durable and offers a wide variety of aspects. As a result, stainless steel can be found in many everyday objects. It also plays a prominent role in an array of industries, including energy, transportation, building, research, medicine, food and logistics.

Inconel 601 (N06601) Nickel-based alloy plasticity machinability.

Super duplex UNS S32750 Buttweld Fittings has a low carbon content which lowers the risk of carbide precipitation in the grain boundaries during the heat treatment. They are highly resistant to crevice corrosion due to high chromium and molybdenum content of UNS S32750 Super Duplex Pipe Fittings makes it extremely resistant to uniform corrosion by organic acids such as formic and acetic acid.

Monel 400 is a nickel-copper alloy (about 67% Ni ¨C 23% Cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions.?Butt-weld and forged fittings are available.Excellent corrosion resistance in many acidic and alkaline environments Especially suitable for reducing conditions. Good ductility and thermal conductivity Ideal for seawater applications.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Monel K500 alloy has excellent corrosion resistance, and has higher strength and hardness than Monel 400. This is due to the addition of elements such as Al and Ti to the alloy, and after a certain heat treatment, there are dispersed intermetallic compounds on the substrate.

Piping systems using butt welded fittings have many inherent advantages over other forms. For example, welding the fitting to the pipe means it is permanently leak-proof, and the continuous metal structure formed between the pipe and the fitting increases the strength of the system. , smooth interior surfaces and gradual directional changes reduce pressure losses and turbulence, and minimize corrosion and erosion and minimize space occupied by the welded system.