x5cr13 stainless steel round bar

Grade 410 stainless steel is a general-purpose martensitic stainless steel containing 11.5% chromium with good corrosion resistance. However, through a series of processes such as quenching, tempering, and polishing, the corrosion resistance of grade 410 steel can be further enhanced. Quenching and tempering can harden grade 410 steel. They are typically used in applications involving mild corrosion, heat resistance and high strength.

AL-6XN ? alloy (UNS N08367) is a low carbon, high purity, nitrogen containing “super austenitic” stainless steel alloy. AL-6XN alloy is designed to be a seawater resistant material and has been shown to resist a wide range of corrosive environments.

Generally, extruded stainless steel flat bars and stainless steel angles are hot rolled, annealed and pickled. Dimensional tolerances conform to ASTM A484/A484 M-06. Euro Steel stocks stainless steel flat bars and stainless steel angles in 6m lengths in grades 304L, 316 L, other grades available on request.

Applications for 410 stainless steel rods are valve and pump parts, fasteners, cutlery, turbine parts and bushings.

Applications and typical uses of stainless steel round bars are: Offshore (foils, helideck platforms, etc.), food industry, pulp and paper industry, aerospace (turbine blades, etc.), mechanical parts, nuclear waste barrels, valve stems, balls, liners sleeves, valve seats, etc.

Stainless Steel 316 or 316L SS is a chromium-nickel stainless steel with the addition of molybdenum for improved corrosion resistance and mechanical properties. It is non-magnetic in the annealed state and cannot be hardened by heat treatment.

This stainless steel round bar is very weldable. Strength, corrosion resistance and simplified manufacturing can make it a cost-effective alternative to high strength carbon steel and other stainless steel grades.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Like other austenitic grades, these grades have excellent toughness even down to low temperatures, although other grades are often used in this environment.
Grade 310sL (and a proprietary version of this grade), a version of the 310s with a maximum carbon content of 0.03%, is sometimes used in very specific corrosive environments, such as urea production.

Grade 316 is known for its toughness and excellent corrosion resistance. This alloy has proven useful in many metal engineering projects, especially in exterior and coastal applications and where welding is required. Machining at level 316 is a little more difficult, but can be done successfully with the right tools.

Grade 310sS (UNS S310s08) is used when the application environment involves wet corrosive agents in a temperature range lower than what is normally considered “high temperature” service. The lower carbon content of 310sS does reduce its high temperature strength compared to 310s.

ASTM A479 304 products are designed to meet precision requirements and maintain high international standards throughout. The material specification is so versatile that products made from it can be used in a wide range of applications across a wide range of industries. They have excellent welding and forming properties. Grade 304 has an austenitic structure which helps it to be deep drawn without any intermediate annealing.

As a stainless steel bar grade supplier, HT PIPE offers bar products and services. Stainless steel is not a single material, but a name for a family of corrosion-resistant steels. Like many scientific discoveries, the origin of stainless steel was an accident. In 1913, Sheffield, England, Harry Brearley was working on the development of a new steel alloy for gun barrels. He noticed that some of his samples did not rust and were difficult to etch. These alloys contain approximately 13% chromium. The first application of these steels was in cutlery, for which Sheffield subsequently became famous. Concurrent work in France led to the development of the first austenitic stainless steels.

Grade 304 stainless steel rods have become a favorite of manufacturers – often used to make safety gratings, frames, tools, shafts, gears and items required in the construction industry.

Our 347 stainless steel bars are extremely resistant to prolonged heat and corrosion, making them ideal for power generation, engines, welded fabrication and other high temperature applications. Also known as UNS S34700 bars, these 347 stainless steel bars have superior creep and stress rupture properties compared to other grades such as 304 stainless steel, with excellent mechanical properties.

Because of the potential for water ingress, exposure to changing weather conditions, exposure to chemicals, chlorides and acids. So stainless steel bar is an excellent choice.

Characteristics of 304: As a heat-resistant grade, 304 stainless steel bar has good corrosion resistance to many chemical corrosive agents and industrial environments. And with good formability, 304 can be easily welded by all common methods. An ultra-low carbon variant called 304L avoids harmful carbide precipitation from welding. This variation provides the same corrosion resistance as 304, but with slightly lower mechanical properties.

F55 is the common industry name for UNS S32760 stainless steel. Industry uses ASTM A276 F55 Duplex Round Bar because of its high mechanical strength and resistance to pitting and crevice corrosion. It is available in thicknesses from 3 to 12 mm and in ISO tolerance classes h11, h11-DIN 1013. It is a ductile product and can therefore be used in railway engines and passenger cars.

HT PIPE is a well-known company that manufactures and sells SS 410 round bars with good corrosion resistance in tumbling environments. Stainless steel 410 square bars are also very resistant to hydrochloric acid at all temperatures and concentrations. Well, this stainless 410 flat bar must not be used in the temperature range between 1000¡ãF and 1600¡ãF because the alloy will be less ductile. These stainless steel 410 threaded rods are used in a variety of applications such as chemical processes, mechanical components in immersion atmospheres, vacuum furnaces, and more.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

Stainless steel bars or rods are used in a variety of applications and are widely used in the construction industry due to their durability and resistance to corrosion and rust.
We stock bars and rods in diameters ranging from 3mm to 76.2mm, lengths up to 3m and available in 3 metal grades.
303 – has good corrosion resistance, can be freely processed, not suitable for welding or forming.
304 – has good corrosion resistance, suitable for forming and welding, general machining.
316 – is our highest grade, has excellent corrosion resistance, is suitable for forming and welding, but is slightly more difficult to machine.

Applications for 416 stainless steel rods are pump shafts, valve components and automatic screw machine parts. Its properties are that this is considered a “free processing variant” of 410, with effective corrosion resistance to natural food acids, alkaline salts, water and most atmospheres.

Grade 304 is a versatile, popular and economical choice for many applications. However, having said that, the uses and uses of 316 stainless steel rods are very different from 304 stainless steel rods. First of all, ASTM a276 Type 316 Round Bar is ideal for use in marine environments as it is resistant to seawater and salt water and solutions different from Grade 304 will not rot in marine environments.

316 stainless steel round bars are ideal for most machining techniques and for indoor and outdoor applications. AISI 316 stainless steel is a non-magnetic, high-strength material with excellent corrosion resistance. 316 is slightly stronger than 303 and 304 stainless steel. Making it ideal for the food and pharmaceutical industries, as well as in areas involving marine environments, aerospace, process equipment, chemicals or other aggressive substances.

Steel bars are one of the core components of any manufacturing
industry or for that matter any industry that relies on machineries.
Thanks to its versatile applications, steel bars find itself in the
epicenter of most of engineering industries, be it automotive, textile,
fabrication, construction, cement, ship building, paper and pulp,
defence, heavy earth moving equipments or aerospace.
The overwhelming popularity of steel bars is owed to the fact that
it is possible to be produced in varying types, shapes, sizes, and
grades of bars to cater the exact technical requirements. Steel
bars generally have the shapes such as flat, round, hexagonal,
square and channel and on most of the occasions, it is the shape
of the bar that defines its application area

The SS 304L electrode is a variant of Type 304 with a lower carbon content to improve weldability and reduce the risk of reduced corrosion resistance around the weld. For severely corrosive environments, lower levels of SS 304L Bars were chosen due to its excellent resistance to intergranular corrosion. The industries that mainly use this level are nuclear power, general engineering, etc.

Grade 316 – Second only to 304 among austenitic stainless steels, this is the standard molybdenum-containing stainless steel, which means it has better overall corrosion resistance than 304, especially pitting and corrosion commonly found in chloride environments crevice corrosion. It has excellent forming and welding characteristics.

Stainless steel UNS S30400 round bars are used to grow a variety of utensils, chemical equipment, cookware and loads of various digital and electrical machinery and parts. They are also used in the cement industry, shipbuilding industry, petrochemical industry, chemical industry, sugar mills, etc.
We use the best metal alloys available to manufacture the round bars and their finish is clean and precise.

Polished stainless steel bars are made of 304 stainless steel. They have good machinability, good formability and excellent weldability. They also show good corrosion resistance. These rebars are used in a variety of architectural and structural applications. Instead of working wheels, these bars are polished with leather chain straps. This is done for a smoother and brighter surface. They are also available in a mirror finish.

This stainless steel round bar is an age-hardening martensitic stainless steel that combines high strength with the corrosion resistance of stainless steel. Hardening is achieved by a short, simple low temperature treatment. Unlike conventional martensitic stainless steels.