2 inch stainless steel pipe fittings best 304 tees

A pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction
or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ASTM A403 WP317L covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.
R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

304 fittings meet steel 304 strength standards and 304L ultra-low carbon standards. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

Our Stainless Steel 904L Buttweld Fittings (WNR 1.4539) are used in Power plants using fossil or nuclear fuels, and also in geothermal energy for harnessing heat from the earth. SS 904L Welded Tube Fittings are used for the cold chain to keep produce fresh, drinks, and frozen foods at a set temperature. SS WERKSTOFF NR. 1.4539 Buttweld Pipe Fittings are used in industries such as Off-Shore Oil Drilling Companies, Power Generation, Petrochemicals, Gas Processing, Specialty Chemicals, Pharmaceuticals, Pharmaceutical Equipment, Chemical Equipment, Sea Water Equipment, Heat Exchangers, Condensers, Pulp and Paper Industry.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

It is exported near and at a distance, which speaks to the technical complexity of our products. It is known for its durable properties, rust resistance, longer life and more. Inconel WNR 2.4668 fittings are used in heat exchangers, pressure vessels, piping, valves, flanges and fittings, condensers, etc.

Stainless steel grade 317L is a low carbon version of grade 317 stainless steel.Our Stainless Steel 317/317L Pipe Elbow are available in several end types, like threads, bevelled ends, bended, seamless, etc. and in different diameters and thicknesses.

Inconel 718 Fitting (UNS N07718) is a chromium-nickel-molybdenum alloy considered resistant to a wide range of severe corrosive environments, crevice corrosion and pitting corrosion. Inconel 625 Fitting (UNS N06625) is an oxidation and corrosion resistant nickel alloy with excellent water corrosion resistance and high strength. Inconel 601 Fitting (UNS N06601) is a nickel-chromium alloy used for functions requiring heat and corrosion resistance.

It has very good resistance to stress corrosion cracking Due to the control of carbon content and grain size, 601 has high creep rupture strength, so 601 is recommended for use in areas above 500 ¡ãC.

Monel 400 is resistant to both steam and seawater as well as highly caustic solutions such as sulfuric, hydrochloric, and hydrofluoric acids when they are deaerated.

The melting of titanium can only occur in a chemically inert atmosphere such as a vacuum.

Duplex stainless steel fittings include the selection and preparation of pipes or tubes, joining them together in various ways, and locating and repairing leaks. It combines several beneficial properties of ferritic and austenitic stainless steels.

Valued for its high strength and corrosion-resistant properties, Monel 400 is available from Continental Steel in multiple forms for use in a variety of end uses.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Incoloy is a group of superalloys with good electrical resistance and tolerances. Incoloy 800 is an alloy of iron, nickel and chromium. These alloys are extremely resistant to corrosion and oxidation. They are not easily deformed or broken down under extreme pressure and heat. The alloy has medium strength and Incoloy 800 material has excellent mechanical properties.

Inconel600 is suitable for welding with the same material or other metals by any traditional welding process, such as tungsten electrode inert gas welding, plasma arc welding, manual sub-arc welding, metal inert gas shielded welding, molten arc inert gas shielded welding, and pulsed arc welding. Welding is the preferred solution. When using manual arc welding, it is recommended to use a shielding gas mixed with various components (Ar+He+H2+CO2).
Welding of Incoloy 825 must be carried out in the annealed condition and cleaned with a stainless steel wire brush to remove stains, dust and various markings. When welding the root of the weld, extreme care must be taken (Argon 99.99) to obtain the best quality of the root weld so that the weld does not produce oxides after the root has been welded. Color from the weld heat-affected zone should be removed with a stainless steel brush while the weld area is not cool.

These A234 WPB SCH 80 Elbow are also available in a wide size range. The purpose to use a ASTM A234 gr WPB elbow is to change direction or flow in a piping system.

Incoloy 800H is an iron-nickel-chromium alloy having the same basic composition as Incoloy 800, with significantly higher creep-rupture strength.

Chromium confers resistance to sulfur compounds and also provides resistance to oxidizing conditions at high temperatures or in corrosive solutions.

Inconel 601 has good resistance to stress corrosion cracking. Due to the control of carbon content and grain size, 601 has high creep rupture strength, so it is recommended to use 601 in the field above 500 ¡ãC.

This nickel alloy is attacked in sulfur-bearing gases above approximately 700¡ã F and molten sulfur attacks the alloy at temperatures over approximately 500¡ã F.

ASTM A403 WP347H ismainly used where corrosion resistance and sustained operations at temperatures between 800¡ã F. and 1600¡ã F. is of the utmost importance. It is also a superior grade for use on heavy welded objects, which cannot be re-annealed.

One of the greatest benefits of Inconel 600 fittings is their ability to maintain their performance even at high temperatures. It has a minimum yield strength of 310 MPa and a minimum tensile strength of 655 MPa. It has an elongation of 40%, which is pretty good. Inconel 600 material has a melting point of 1413 degrees Celsius, which makes it ideal for high temperature applications and has a long service life. It can be easily bent and welded, and the size can be customized according to specific requirements.

Our ASTM A403 SS 304 Elbow has a tensile strength of 75 ksi, guarantees extreme dexterity, has a load-carrying capacity high enough to work under constant pressure, is resistant to atmospheric corrosion, and can be used to seal pipe ends and prevent General-purpose fluids such as internal contamination.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with good mechanical properties from sub-zero temperatures up to about 550 ¡ãC (1020 ¡ãF) and is approved for pressure vessels with wall temperatures from -10 to 425 ¡ãC (14 to 800 ¡ãF) according to VdTUV-Wbl. 263 and up to 900 ¡ãF (480 ¡ãC) according to ASME Boiler and Pressure Vessel Code.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

There are different types of fittings such as bends, tees, crosses, reducers, caps and the WPHY 52 Elbow.In sour service wells, when hydrogen sulphide gas reacts with water, the hydrogen molecule gets deposited either on the pipes or fittings.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.