Nickel alloy pipe stainless steel pipe carbon steel pipe samples

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Generally, the corrosion resistance of ASTM B444 Inconel Welded Pipes are very good in reducing environments, but poor in oxidizing conditions. Inconel Pipes does not work good in oxidizing acids, such as nitric acid and nitrous.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Inconel 600 alloy is a nickel-chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride-containing atmospheres. It is a non-magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.
ASTM B167 Alloy 601 Seamless Pipe Supplier, Inconel 601 Pipe Exporter, ASTM B983 Inconel 718 Pipe, ASTM B516 Inconel 600 Welded Pipe, ASME SB444 Inconel 625 Seamless Pipe, UNS N06600 Welded Pipe, Inconel 600 Seamless Pipe, Inconel Pipe Made in India business.

Although ASTM B165 UNS N04400 material has lower strength in the annealed condition, it exhibits excellent mechanical properties even at sub-zero temperatures. Monel tubes can be used up to 1000 degrees Fahrenheit. In order to improve the mechanical properties of Monel 400 welded pipe, it is possible to make finished products on it.

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.

La materia prima de Alloy 20 es de alta calidad. Esto ayuda a que el producto final funcione en condiciones severas de corrosion y agrietamiento. A traves de una serie de pruebas, hemos llegado a diferentes informes y conclusiones. Nuestro analisis promete pruebas quimicas, pruebas de elementos traza y varias otras comprobaciones.

In aqueous mediums such as oxidizing chemicals, the alloy 625 seamless pipe is known to be quite resistant. On the other hand, the combination of a high content of both nickel and molybdenum in the alloy 625 welded pipe is what supplies resistance to the alloy in a non- oxidizing environment.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy C-276 has excellent resistance to pitting corrosion, stress corrosion cracking and oxidizing atmospheres. Alloy C-276 also exhibits resistance to seawater corrosion under crevice conditions, which can lead to aggressive corrosion of other commonly used materials.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.32

Pure Nickel Hot Worked Tubes are designed for excellent dimensional accuracy and superior performance. These pipes are very reliable and are available in single random, double random and custom sizes. Brushed Nickel Pipe Sleeves are an easy way to increase the length of pipe in a piping system. These sleeves act as an insulating material that protects pipes in various systems.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.55

HASTELLOY C-276 alloy has excellent resistance to a variety of chemical process environments, including strong oxidizing agents such as ferric and copper chlorides, hot fouling media (organic and inorganic), chlorine, formic and acetic acids, acetic anhydride, and Seawater and brine solutions. It can be used in flue gas desulfurization systems due to its excellent resistance to sulfur compounds and chloride ions in most scrubbers.

Welding Inconel 3″ Pipe is not necessarily more difficult to weld than stainless, just different. By following the welding procedures outlined in the header construction tips article, successful welds with Inconel 3″ Pipe are possible.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Monel 400 has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. The composition is shown in the Table below.

Alloy 400 Seamless Pipe exhibits excellent resistance to not only caustic solutions but also brine and seawater, which makes it perfect for marine applications.

There are many steel alloys that are nickel-based and are exhibiting high corrosion resistance and Hastelloy alloy is really one of the best alloys. Additionally, it is having good resistance to cracking and pitting.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Hastelloy B2 EFW Pipes is highly resistant to all concentrations and temperatures of hydrochloric acid.

Alloy 625 / Inconel 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. It has become a standard material of construction in a wide variety of industrial applications, which is unusual for an alloy. Alloy 625 is valuable in that it is versatile and able to solve a wide variety of design and application problems.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Hastelloy pipes are highly resistant to localized corrosion, cracking and stress corrosion. The material specification of Hastelloy tube is a long-term and cost-effective solution to avoid damage.

Hastelloy X is a nickel base alloy that possesses exceptional strength and oxidation resistance up to 2200¡ãF. It has also been found to be exceptionally resistant to stress-corrosion cracking in petrochemical applications. The alloy has excellent forming and welding characteristics.
HASTELLOY? X alloy (UNS N06002 (W86002) is a nickel-chromium-iron-molybdenum
alloy that possesses an exceptional combination of oxidation resistance, fabricability and
high-temperature strength. It has also been found to be exceptionally resistant to stresscorrosion cracking in petrochemical applications. X alloy exhibits good ductility after prolonged exposure at temperatures of 1200, 1400, 1600¡ãF (650, 760 and 870¡ãC) for 16,000
hours.

Additionally, the alloy’s properties make it an excellent choice for sea-water applications, including freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

Incoloy 909 Tube has a higher ferrous content and a lower overall cost of ownership. We offer quick responses to customer inquiries and specialize in the rapid delivery of both large and small quantities of Incoloy 909 Tube.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

Hastelloy B3 is molybdenum and nickel alloys family additional member with greater hydrochloric acid resistance at various concentrations and temperatures. It is withstanding formic, sulphuric and phosphoric acid as well as non-oxidizing acids.

Incoloy 825 alloy pipe is made from basic elements such as iron, nickel and chromium, which provide basic rust and pitting resistance at ambient temperatures. This alloy has elements such as molybdenum, titanium and copper added in small parts, adding more to the product and increasing its machinability even in marine conditions.

This makes them ideal for use in heat exchangers in chemical processing, for example, which rely on pipes that can withstand high temperatures and corrosive environments. Nickel-based tubing is also used in steam generators, aircraft systems, and oil and gas extraction. To meet the demand for these high-quality products, there is a considerable selection of nickel alloy pipes and tubes on the market.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.45

Nickel-based alloys are very useful materials for the manufacture of high-quality tubular products. One of the key reasons is their excellent corrosion resistance in both waterborne and high temperature applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.21

NAS NW276 is a Ni Cr Mo alloy with excellent corrosion resistance in both oxidizing and reducing atmospheres. In this alloy, carbide precipitation in the heat affected zone (HAZ) is suppressed and corrosion resistance is improved by reducing the contents of C and Si.

Los tubos de caldera de aleacion C276 estan disponibles en tama?os ATSM 622/ 619/ 775/ 516/ 626. La tuberia sin soldadura Hastelloy C276 funciona bien incluso en agua salada corrosiva. Los fabricantes de tuberias Hastelloy recomiendan la tuberia soldada Hastelloy Astm B626 C276 por su resistencia a los compuestos de cloro.