316 316l stainless steel pipe fitting elbows

we are manufacturer of pipe fittings, stainless steel pipe fittings, stainless steel erw pipe fittings, stainless steel seamless pipe fittings, stinless steel welded pipe fittings, stainless steel buttweld pipe fittings, stainless steel 304 pipe fittings, stainless steel 304L pipe fittings, stainless steel 310 pipe fittings, stainless steel 316 pipe fittings, stainless steel 316L pipe fittings, stainless steel 321 pipe fittings

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

Hastelloy C276 fittings are the highest quality finishing fittings for long life, high pressure and zero defects. Hastelloy C276 fittings are alloys that maintain strength, toughness and corrosion resistance in high temperature environments. These alloys are used in a variety of industries and valuable applications such as oil refineries, chemical plants and power generation, nuclear power, aerospace and more.

ASTM A234 WPB short radius in accordance with ASME B16.9.Carbon steel pipe fittings manufactured to ASMT A234 are usually furnished in the butt-welding form in accordance with ASME B16.9 or ASME B16.49.

Stainless steel 317L is commonly referred as UNS S31700, and is primarily comprised of 18% to 20% chromium and 11% to 15% nickel. 317L is molybdenum bearing austenitic stainless steel similar to 316, but with higher molybdenum content.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

304 fittings meet steel 304 strength standards and 304L ultra-low carbon standards. Fittings are components used in many different industries to connect, terminate, control flow and change the direction of pipes.

HASTELLOY X pipe bend also resists carburization and nitriding, two common conditions which often lead to early failure in high-temperature alloys. After 100 hours in petroleum coke, four other materials were completely penetrated by carburization and whereas.

304 and 304L are austenitic alloys, which means that a nonmagnetic solid solution of ferric carbide or carbon in iron is used in giving this stainless steel its corrosion-resistant properties.

About high strength and excellent impact toughness, stress corrosion cracking resistance and high strength are exhibited by its Ferritic nature where as ease of fabrication and corrosion resistances are exhibited by its Austenitic nature. UNS S31803 Pipe Fittings has high applicability where demand for good corrosion resistance and good strength is required. In oxidizing, acidic and caustic environments, it exhibits good resistance towards pitting and crevice corrosion.

A403 316L Stainless Steel covers the standard for wrought austenitic stainless steel fittings for pressure piping applications.Compared to grade 316, the pitting resistance properties of ASME B16.9 SS 316L Fitting is much higher.

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.

We are engaged in the manufacture and supply of high quality duplex steel s31803 pipe fittings and duplex steel s32205 pipe fittings. These duplex s31803 seamless pipe fittings and duplex s32205 welded pipe fittings are available in various sizes according to customer requirements.

We manufacture SA403 WP 304 Short Radius and Long Radius Elbows very strong with a minimum yield strength of 205MPa and a minimum tensile strength of 515MPa. These work well in high temperature environments up to 870 degrees Celsius.

The cast stainless steel pipe fittings such as 304 or 3016l are available in several different types for use in different applications such as threaded, flared, without flare and flange adapters. They provide a safe and leak-proof seal for refineries, chemical processing units, power supply units, and different processing lines. They are suitable for high-pressure applications as well as high temperatures, for instance, nuclear industry and petrochemical, etc.

Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners.

All kinds of pipe products have DIN, ISO, 3A, SMS, BS, IDF, DS, BPE standard. And pipe fitting: 45¡ã/90¡ã/180¡ãbend series, tee/cross series, concentric(eccentric) series make your pipeline system free connectivity. Each series pipe fittings have weld, clamp, thread and flange four common install ways with your pipe system standard connections.

C276 Elbow has excellent corrosion resistance to a wide range of concentrated hot acids and reducing environments and can be easily used in hot sulfuric and hydrochloric applications.

AL-6XN is a low carbon, nitrogen containing super austenitic stainless steel. The alloy is designed to be a seawater resistant material and has been found to resist a wide range of corrosive environments. Due to the alloy’s corrosion resistance and high strength, AL-6XN is a better choice than traditional duplex stainless alloys and more cost-effective nickel-based alloys.

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

HT PIPE offers a range of precision finished duplex fittings & flanges to ensure a good flow in seamless. Our flanges are corrosion resistant & designed to operate in high pressure environments. Here at HT PIPE we supply a broad range of piping products and materials which are used in many different industries.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

These caps provide a safe cushion against any type of cracks, chips and cracks on the pipes. We offer 1-8 in female pipe fittings duplex 2205 pipe cap.

321 stainless steel, also known as UNS S32100 and Grade 321, is primarily comprised of 17% to 19% chromium, 12% nickel, .25% to 1% silicon, 2% maximum manganese, traces of phosphorus and sulfur, 5 x (c + n) .70% titanium, with the balance being iron. With regards to corrosion resistance, 321 Stainless Steel is equivalent to Grade 304 in the annealed condition and is superior if the application involves service in the 797¡ã to 1652¡ã F range. 321 Stainless Steel combines high strength, resistance to scaling and phase stability with resistance to subsequent aqueous corrosion.
UNS S32100 Reducing Tee is preferred due to its ability to work in high pressure and temperature even at a higher temperature.
Stainless Steel 321 / 321H Pipe Fittings are used in filtration, refrigeration, oil, gas, petrochemical and in offshore oil drilling industries. The material has chromium, nickel, titanium and other elements along with carbon. The 321H has higher carbon than the other versions. There are different types of fittings such as the 321/321H Stainless Steel Buttweld Fittings which are most commonly used but there are also the seamless fittings. The Stainless Steel UNS S32100 Pipe Elbow is a fitting type that is used in high temperature applications to change direction of flow.

317L is non-magnetic in the annealed condition but may become slightly magnetic as a result of welding.Fittings supplied under this specification shall be examined visually for surface discontinuities, surface checks, and mechanical marks.

Our offered SS 904L Buttweld Elbow contains a low carbon austenitic nickel-chromium stainless steel with additions of molybdenum and copper.The Stainless Steel 904L Pipe Fittings are mainly used in the chemical industries, utility scrubber assemblies, etc.

The manufacturing process of pipe fittings includes forging and forming operations. As well as pressing, hammering, piercing, extrusion, upsetting, rolling, bending, fusion welding and machining. Or a combination of two or more of these operations.

The alloy has great mechanical properties at subzero temperatures, and with a melting point of 2370¡ã ¨C 2460¡ã F, products can be used at temperatures up to 1000¡ã C.

Stainless steel 316 fittings are made from 316 austenitic chrome-nickel-molybdenum alloy. This is the second most used stainless steel grade in the world. The addition of molybdenum to the composition provides higher corrosion resistance and ductility compared to grade 304 steel fittings. ASTM A403 Gr WP316 Butt Weld Fittings include different grades of material such as 304, 304L, 316 and 316L steel grades.

S32750 (2507) is a duplex stainless steel that combines many of the excellent properties of ferritic and austenitic steels. Due to its high chromium and molybdenum content, it exhibits excellent resistance to pitting, crevice and uniform corrosion. The two-phase microstructure ensures that the steel has high resistance to stress corrosion cracking and high mechanical strength. In addition, it also has the characteristics of strong resistance to chloride pitting, high thermal conductivity and low thermal expansion coefficient.