2 inch duplex pipe fittings plumbing pipe fittings cap

ASTM A420 covers elbow, tee, reducer, cap, union and etc, which manufactured according to ASME B16.9, ASME B16.11, MSS SP-79 and MSS SP-95, types in seamless and welded structual pipe fittings.

We supply Stainless Steel 316H Elbow Pipe Fittings to a variety of customers including fabricators of pressure vessels, industrial boilers and heat exchangers. Fusion welding performance for Stainless Steel 316H Reducer Pipe Fittings is excellent both with and without fillers. Stainless Steel 316H Tee Pipe Fittings, with its higher carbon content has application at elevated temperatures, as does the stabilised grade 316Ti.

S31803 is the Unified Numbering System (UNS) designation for the original duplex stainless steel. The UNS system was created by multiple trade groups in the 1970s to reduce confusion when the same alloy was called different things, and vice versa. Each metal is represented by a letter followed by five numbers, where the letter represents the metal series, i.e. S for stainless steel.

For paper mill applications requiring lower alloy grades that do not have sufficient corrosion resistance. Based on a 22% chromium content, they have a combined austenitic:ferritic microstructure that provides greater strength, corrosion resistance and cost-effectiveness.

The UNS S31803 (ASTM F51) specification has been largely superseded by UNS S32205 (1.4462, ASTM F60). This reflects their desire to maximize the alloy’s corrosion properties, thanks to the development of the AOD steelmaking process, which allows for tighter control of composition. In addition, it allows to influence the nitrogen addition level rather than just being present as a background element. Therefore, the highest performing duplex grades seek to maximize the content of chromium (Cr), molybdenum (Mo) and nitrogen (N).

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The standards are ASME B16.9 and B16.28 and the schedules range from sch5s to XXS.

In most cases, fittings can be used in a “welded” condition, where preheating is not required. UNS S30400 grade fittings have excellent resistance to pitting, crevice and general corrosion in compounds containing sulfuric, phosphoric and nitric acids. Although generally regarded as a traditional metal, it is labeled as nickel-based. It is known for making explosives, compounds, gasoline, solvents, and more.

Stainless steel 316 pipe fittings are used in pipeline systems to connect straight pipes to adapt to different sizes and shapes, and to achieve the purpose of regulating fluid flow. It is used in plumbing systems to control the delivery of water, gas or liquid waste in commercial or domestic environments.

Its toughness lends itself to use in nuclear power plants, mining, cement, and the oil and gas industry.

Incoloy 800HT Buttweld Pipe Fittings play an important role where fluids are getting operated at high temperatures and extreme pressures. Pipe Fittings are mainly used in a piping system to change the flow. By using the types of buttweld fittings the industrial applications are working smoothly and performing the flow of fluids from one place to another

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

ALLOY400 is a single-phase solid-solution Ni-Cu alloy with excellent corrosion resistance in a wide range of marine and chemical environments and has freedom from chloride induced stress-corrosion cracking.

Regarding ASTM A815 WPS31803 s32750 s32760 904L S31254 254SMO 180deg ELBOW ASME B16.9, duplex stainless steels are a family of stainless steels. These are called duplex (or austenitic-ferritic) grades because their metallurgical structure consists of roughly equal proportions of austenite (face-centered cubic lattice) and ferrite (body-centered cubic lattice) two phase composition. They are designed to provide better corrosion resistance, especially chloride stress corrosion and chloride pitting.

HASTELLOY C276 is a Nickel-chromium-molybdenum wrought alloy that is considered the most versatile corrosion resistant alloy available. It can be in the form of elbow, reducer, tee, cap, stub end, cross etc.

Our SS 310S pipe fittings are made of low carbon austenitic steel known for its ability to resist corrosion, especially water corrosion and sulfidation in chemical and ore processing units.

A234 WPB steel pipe fittings mean the pipe fitting which material is ASTM A234 WPB,they are used for the pressure piping systems of moderate and high temperature services.ASTM A234 is the standard of pipe fittings material,it indicates the materials properties of different kinds of carbon steel and alloy steel,WPB is one of the steel grade in this standard.W means weldable,P means pressure,B is grade b,refer to the minimum yield strength,like the astm A106 A53,Gr.B or API 5L Gr.B.A234 WPB is the most common carbon steel pipe fittings material.

High levels of chloride prevent corrosion and can operate at temperatures up to 300 degrees Celsius. Duplex stainless steels have better ductility at low temperatures compared to ferritic grades.

Duplex stainless steel 2205 tee consists of branch pipe diameters, which are also tee pipes. These tees have 3 internal holes and can connect pipes of different diameters. Duplex Ss 2205 Reducers are used to accommodate pipes of different sizes in piping systems. These reducers can be concentric or eccentric.

UNS S31254 is an alloy material with anti-corrosion effect, its density is 8.0g/cm3, and the melting point is 1320-1390¡æ. High molybdenum content and high chromium and nitrogen content make UNSS31254 extremely good resistance to pitting and crevice corrosion. The addition of copper improves corrosion resistance in certain acids. In addition, UNSS31254 has good resistance to stress corrosion cracking due to its high nickel content and high chromium and molybdenum content.

These Duplex Steel UNS S31803 Butt Weld Fittings are manufactured by maintaining quality. Our experts first select raw materials using the latest tools and services, then manufacture. We always follow national and international standards and codes to maintain the quality standards of these duplex steel fittings.

A equal tee is the most common pipe fitting. It is used to either combine or split a fluid flow. It is a type of pipe fitting which is T-shaped having two outlets, at 90¡ã to the connection to the main line. It is a short piece of pipe with a lateral outlet. A tee is used for connecting pipes of different diameters or for changing the direction of pipe runs. They are made of various materials and available in various sizes and finishes. They are extensively used in pipeline networks to transport two-phase fluid mixtures.

This nickel steel alloy can be used in the as-welded condition because it resists the formation of grain-boundary carbide precipitates in the weld heat-affected zone.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

It is exported near and at a distance, which speaks to the technical complexity of our products. It is known for its durable properties, rust resistance, longer life and more. Inconel WNR 2.4668 fittings are used in heat exchangers, pressure vessels, piping, valves, flanges and fittings, condensers, etc.

The high-temperature plasticity of the experimental alloy added with trace amounts of Mg, Cr and Co is obviously improved, and it exhibits certain superplasticity. At 1010¡æ, the strain rate sensitivity index m is 0.32, and the maximum elongation is 240%.

C22 has excellent resistance to chloride-induced localized corrosion, including pitting, crevice corrosion, and stress corrosion cracking.

ASTM A403 WP316L the low carbon version of 316 and is immune from sensitisation (grain boundary carbide precipitation). Thus it is extensively used in heavy gauge welded components (over about 6mm). There is commonly no appreciable price difference between 316 and 316L stainless steel.

SA403 wp304 pipe end caps cover pipe ends, stop fluid flow and protect pipe threads. In multi-end fittings, it is often used to direct flow to a specific end.

Stainless Steel 904L Buttweld and Forged Fitting have exceptional quality completing and coercion for long life, high weight. Stainless Steel 904L Buttweld and Forged Fitting are fabricated to support high weight and item guarantee. Stainless Steel 904L Buttweld and Forged Fitting in the type of Bend, Elbow, Tee, Reducer, Cap, Stubend, Nipple, Union, Cross, Coupling, Socket, Plug, Sockolet, Weldolet, Threadolet, Elbolet, Nipolet Etc.

They exhibit excellent corrosion resistance to a wide range of corrosive environments. Type 304 and 304L grades of stainless steel pipe exhibit good machinability and have excellent weld-ability characteristics with or without the addition of filler metals.This type of steel is extremely durable and is utilized in a wide range of applications and industries.