6 inch welded stainless steel pipe fittings 304 tee

316L stainless steel is an austenitic alloy often referred to as “marine grade stainless steel” because it is used in nearly 90% of marine applications – including filtration. In addition to metals such as iron and nickel, 316L contains 16-18% chromium and 2-3% molybdenum. These elements are important because they improve the alloy’s corrosion resistance; chromium interacts with oxygen in seawater to form a protective layer of chromium oxide, while molybdenum improves the metal’s resistance to pitting corrosion. Additionally, 316L has a lower carbon content (hence the use of “L” in its name), which gives it better protection against corrosion.

Duplex steel tees generally perform well in environments that cause premature failure of austenitic grades, where it has better seawater resistance than 316 grades. Duplex steel is a nitrogen-enhanced stainless steel designed to solve common corrosion problems encountered with 300 series stainless steels.

AISI 04 stainless steel and 304L stainless steel are general purpose stainless steels with good resistance to atmospheric corrosion, many organic and inorganic chemicals, and food and beverages. The difference between 304 and 304L stainless steel is that 304L has a maximum carbon content of 0.03, which is suitable for welding, while 304 has a moderate carbon content.

MONEL K500 is a nickel-copper alloy, precipitation hardenable through additions of aluminum and titanium.

A butt weld pipe fitting is designed to be welded on site at its end(s) to connect pipe(s) together and allow change in direction or pipe diameter, or branching or ending.

This fitting then becomes part of a system for transporting fluids (oil, gas, steam, chemicals, …) in a safe and efficient manner, over short or long distances.

The stainless steel finish of this adjustable flush elbow fitting will perfectly match your brushed stainless steel 2″ OD bar rail. Simply adjust the angle on the flush elbow to the desired position, tighten the screws with a hex wrench, and slide the pipe into either end.

In order to convey the pipeline, it is necessary to remove the straight hose in the pipeline. When using various pipelines, various pipelines must be used. When the pipeline is used, the elbow must be used to change the size of the pipeline. When bifurcating, the three-way pipe The flange connection used when the joint is used with various pipe joints, in order to reach the long-distance transmission pipeline, in order to reach the thermal expansion and cold contraction joint or effective connection aging of the pipeline, the long-distance expansion and cold contraction joint is used for the connection of the pipeline. , In the connection of various instruments, there are also the connectors and plugs of the instrument phase.

Furnace rolls made of this alloy were still in good condition after operating for 8700 hours at 2150 Deg. F. Furnace trays, used to support heavy loads, have been exposed to temperatures up to 2300 Deg. F. in an oxidizing atmosphere without bending or warping.

ASTM A420 WPL6 are widely utilized in pressure piping and pressure vessel service at low-temperatures.

SS Pipe Fittings, 316L stainless steel pipe fittings, A403 316L Stainless Steel Buttweld Fittings manufacturers, SA 403 WP 316L, A403 WP316L, ASTM A403 gr WP316L, A403 WP316L Elbow, Stainless Steel ASTM A403 WP316L Pipe Fittings suppliers, WP316L Buttweld Fittings suppliers, A403 316L Fittings manufacturers in China.

The alloy is slightly magnetic at room temperature. Monel 400 is widely used in the chemical, oil and marine industries.

Advantages of 304/304L stainless steel pipe fittings, 304/304L flanges Excellent corrosion resistance in a wide range of atmospheric environments, good oxidation resistance in intermittent use at 870¡ãC and continuous use at 925¡ãC, good Resistant to carbide precipitation, good machinability, stainless steel 304H provides higher strength at elevated temperatures and excellent weldability with and without filler metals.

Stainless steel as 304 or 316 casting combines good corrosion resistance and high strength, which allows the reduction in wall thickness and weight of pipe fittings. Besides, it can withstand very high flow rates, making it capable to withstand long-term exposure to the elements in almost any environment.

ncoloy 800H Forgings have good strength and excellent resistance to oxidation, sulfidation and carburization at elevated temperatures.

Stainless Steel Pipe Bends are resistant to atmospheric corrosion and prevent the internal fluid from getting contaminated.

The Molybdenum of Hastelloy B2 pipe bend is the primary alloying element which provides significant corrosion resistance to reducing environments.

Alloy 800H/800HT is frequently used in applications that involve long-term exposure to elevated temperatures where resistance to oxidation, carburization and other types of elevated temperature corrosion is required.

We are manufacturing Stainless steel 304/ 304L forged fittings in both socket weld and threaded form and Stainless steel 304/ 304L pipe bends in both standard and non standard sizes, with bending radius of 1D to 10D. We offer ex-stock delivery of various standard size and type Stainless steel 304/ 304L pipe fittings, Stainless steel 304/ 304L flanges and Stainless steel 304/ 304L pipe bends.

These super duplex fittings products are designed in accordance with national and international standard specifications. These Super Duplex Steel S32750 Seamless Fittings and Super Duplex Steel S32750 Welded Fittings are widely used in various application industries such as automotive, chemical, marine, power plants, heavy engineering, etc.

Duplex UNS S32205 alloy is equally ferritic and austenitic in nature, and hence a widely used grade of Stainless Steel. UNS S32205 consist of 22% Cr and 3% Mo, 5 to 6% Ni alloyed stainless steel.

A234 Pipe Elbow the radius of curvature is 1.5 times the diameter (R=1.5D). We also accept all orders of CS Elbow A234 WPB up to and including 90 degree to suit your requirements.

Tube caps are used as protective devices designed to protect tube ends of various shapes. The main purpose of using pipe caps is to waterproof connections. They are also used to close the ends of hydraulic or pneumatic pipes and tubes. We supply 1-8 SS304L pipe butt weld pipe fitting cap.

A234 WP9 carbon steel pipe fittings are widely used in many different industries. Alloy Steel A234 Gr. WP9 Buttweld Pipe Fittings are a type of pipe fitting made from carbon steel material, which is strong, durable, and resistant to corrosion. These Alloy Steel WP9 Butt weld Pipe Fittings are commonly used for connecting pipes and fixing them into place. ASTM A234 WP9 Pipe Fittings can be used for both small and large-scale projects, making them incredibly versatile and useful.

S32750 duplex pipe fittings is one of the buttweld fittings and is available in various shapes, sizes and specifications. This is used in marine industries, nuclear projects, power plants and other chemical industries. The durability of ASTM A815 WPS S32750 Fittings is excellent and the specification of this has two types i.e.

The 316 stainless steel reducer is good to be used in water, marine and sea water applications to reduce the size of a pipe line. The ASTM A403 Grade wp316 tee is used to divide or connect two pipes with another pipe. The 316 grade of steel is also used for fittings in food grade applications. The ASME SA 403 WP 316 Pipe Cap is a unique type of fitting in that it closes a pipeline rather than connecting two parts together.

Unlike the bends, the elbows can reduce the pressure applied on the walls when turning the fluid flow direction.Fittings made from WPHY 52 material are known to have a long work life, durable, tough and hard. The WPHY 52 properties make these fittings a perfect cost saving solution for a variety of industries.

304 stainless steel is the most common stainless steel. The steel contains both chromium (between 18% and 20%) and nickel (between 8% and 10.5%)[1] metals as the main non-iron constituents. It is an austenitic stainless steel.When it comes to uses, SS304 can be found in kitchen sinks and other appliances such as toasters and microwave ovens. SS304 is also used to make pressure vessels, wheel covers as well as for building facades.

These caps provide a safe cushion against any type of cracks, chips and cracks on the pipes. We offer 1-8 in female pipe fittings duplex 2205 pipe cap.

Short elbows are widely available and are typically used for pressurized systems in physically tight locations.

Werkstoff No.1.4436 316 stainless steel fittings are resistant to atmospheric corrosion, as well as moderately oxidizing and reducing environments. Corrosion resistant in polluted marine atmospheres. It has excellent resistance to intergranular corrosion.