Aleacion 20 NiCr20CuMo Tubos de Metal de Niquel

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

Many businesses prefer the fact that Inconel 600 is a very versatile alloy. Therefore the alloy is used in several key industries in various forms including the popular Inconel 600 Pipe. The construction of these pipes could be either welded or they could be seamless. There are benefits to using both. For e.g. the preference of an Inconel 600 Welded Pipe, is in applications where its economics plays a very important role. Though cheaper than the seamless constructed one, these pipes have a longitudinal seam, which could become susceptible to intergranular corrosion – if they are improperly processed. In a scenario, where the buyer requires the highest form of corrosion resistance and the ability to withstand a higher pressure, Inconel 600 Seamless Pipe is the best option.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Corrugated Stainless Steel Tubing is stainless steel tubes with helical groove obtained from a plain tube by cold forming. The quantity of Helix and Angle could be designed to optimize the heat transfer performance.

The Incoloy 800h Pipe produced in accordance with the ASTM B407 specification is supplied either in the form of cold worked or hot finished manner. Aside from conforming to the chemistry requirements of the said specification the Sb 407 UNS N08810 Incoloy Alloy 800h Round Pipe, is to be heat treated at determined annealing temperatures. Another requirement that needs to be adhered to is the Sb 407 N08810 Grade 1.4958 Pipe needs to be tested and measured via the Planimetric method.

Technically, Inconel alloy ERW Pipes are resistant to most alkalis, salts, waters, food products, organic substances and atmospheric conditions at both normal temperature and elevated temperatures. Inconel Pipes has good oxidation resistance in intermittent service to 870 Degree C and in continuous service to 925 Degree C.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Alloy C71500 has good corrosion resistance to clean contaminated seawater and is used extensively on heat exchangers using seawater in power plants, desalination, petrochemical plants, etc

800H can not be corroded in many kinds of media. Its high nickel content made it have good stress corrosion resistance cracking properties in the water corrosion condition. High Chromium content made it can better resist pitting and crevice corrosion cracking. This alloy can resist nitric acid and organic acid corrosion, but it is not so fine in the sulfuric acid and hydrochloric acid.

Inconel 600 alloy is a nickel-chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride-containing atmospheres. It is a non-magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.
ASTM B167 Alloy 601 Seamless Pipe Supplier, Inconel 601 Pipe Exporter, ASTM B983 Inconel 718 Pipe, ASTM B516 Inconel 600 Welded Pipe, ASME SB444 Inconel 625 Seamless Pipe, UNS N06600 Welded Pipe, Inconel 600 Seamless Pipe, Inconel Pipe Made in India business.

Alloy 625 / Inconel 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. It has become a standard material of construction in a wide variety of industrial applications, which is unusual for an alloy. Alloy 625 is valuable in that it is versatile and able to solve a wide variety of design and application problems.

Thus precipitation-hardening treatments are not required. This combination of elements also is responsible for superior resistance to a wide range of corrosive environments of unusual severity as well as to high-temperature effects such as oxidation and carburization.

Features of the inconel 600 pipes are as follows- it has good resistance towards corrosion, it is immune to chloride stress and corrosion cracking.

Inconel 600 alloy is a nickel-chromium stabilized alloy. It has very good oxidation resistance at higher temperatures. In addition, it has excellent resistance to carburizing and chloride-containing atmospheres. It is a non-magnetic alloy with very good mechanical properties. Inconel 601 is a chromium and nickel based material for applications requiring heat and corrosion resistance. This material stands out for its resistance to high temperature oxidation.

Some typical applications for Inconel 625 include chemical processing, aerospace and marine engineering, pollution control equipment and nuclear reactors. This nickel alloy has excellent weldability and is often used to weld AL-6XN. This alloy is resistant to a variety of severe corrosive environments, especially pitting and crevice corrosion.

Alloy 600 is a nickel-chromium-iron solid solution strengthened alloy used in applications requiring corrosion and high temperature resistance. Alloy 600 can be used from cryogenic to 2000°F. The alloy also has good workability, weldability and high strength.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 625 was developed in the 1960s to create a material that could be used in steam pipes. Some modifications have been made to its original composition to make it more creep resistant and weldable.

The main reason being that the alloy can not only withstand high stress in and out of the water, but it can also withstand stress across a wide range of temperatures.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

inconel 3IN tube 600 601 625 718 support high strength, has good dimensional accuracy, is sturdy in construction, has an excellent surface finish, and can withstand hard hits. In addition, it has greater resistance to general corrosion, stress corrosion cracking, crevice corrosion, pitting corrosion and oxidation resistance.

Inconel 601 nickel-chromium-iron alloy is a general-purpose engineering material for applications that require resistance to heat and corrosion. The outstanding characteristic of Inconel 601 is its resistance to high-temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined, and welded.

Today, Alloy B2 with restricted chemistry can be used in the welded condition and is less susceptible to SCC under many conditions. As always, care must taken in selecting the right alloy for the desired application.

Alloy 22 is nickel-base and typically contains 22% chromium, 14% molybdenum, and 3% tungsten.
Iron is normally limited to less than 3%. The alloy¡¯s high content of chromium gives it good resistance to
wet corrosion by oxidizing media (e.g., nitric acid and ferric and cupric salts). Its contents of molybdenum
and tungsten give the alloy resistance to wet reducing media (e.g., sulfuric and hydrochloric acids). Alloy
22 exhibits excellent resistance to corrosive attack by seawater under stagnant and flowing conditions.

Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

Incoloy 800H/HT alloy is used for high temperature structural applications. The nickel content makes the alloy highly resistant to chloride stress corrosion cracking and embrittlement from sigma-phase precipitation. Overall corrosion resistance is excellent. Alloys 800H and 800HT have excellent creep and stress rupture properties under solution annealed conditions.

Inconel 625 is an alloy that also performs well at lower temperatures. Temperature changes can cause the alloy tube to expand or contract. Therefore, materials with good ductility, such as Inconel 625 pipe, should be selected for piping systems with temperature fluctuations, especially because of their good properties.

The Inconel 625 Tubing solutions also possess superior resistance to high-temperature effects like oxidation and carburization. Our Alloy 625 Grade 2 Exhaust Tubing solutions are widely used as control and instrumentation tubes.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Nickel alloys are some of the most useful materials for manufacturing technically superior pipes and tubes for industrial applications. Their inherent properties make them viable for a wide range of uses. Nickel alloys are exceptionally corrosion resistant and can be used in high-temperature environments.

Inconel 600 / 601 / 625 / 718 Tubing, this pipe and tube maintains strength over a wide temperature range and has higher temperature capability where aluminum and steel will respect creep thermally induced stone opening views. Suppliers supply pipes and tubes in a variety of sizes and thicknesses according to buyers’ precise requirements.

Hastelloy C-276 is a versatile nickel-molybdenum-chromium-tungsten alloy with excellent corrosion resistance and good machinability. While it does have good oxidation resistance up to 1800¡ãF, Hastelloy C-276 is generally not recommended for high temperature service.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.37

Hastelloy C-276 is ideal for use where protection from aggressive corrosion and localized corrosion attack is required. Other important properties of this alloy Nickel Alloy C-276 and Hastelloy C-276 include its resistance to oxidizing agents.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.35

Although ASTM B165 UNS N04400 material has lower strength in the annealed condition, it exhibits excellent mechanical properties even at sub-zero temperatures. Monel tubes can be used up to 1000 degrees Fahrenheit. In order to improve the mechanical properties of Monel 400 welded pipe, it is possible to make finished products on it.

Inconel 718 Seamless Pipe are Seamless, welded, fabricated and tubes can be found with Inconel 718 Seamless Pipe suppliers in our company. The product can be transported easily based on the facility provided by the company. Such companies also provide zero damage guarantees along with timely delivery.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.

It is used in flue gas desulfurization systems because of its excellent resistance to sulfur compounds and chloride ions encounted in most scrubbers. C 276 alloy has excellent resistance to pitting and to stress corrosion cracking. It is also one of the few materials that withstands the corrosive effects of wet chlorine gas, hypochlorite, and chlorine dioxide.