Super Duplex 2507 nut with high chromium molybdenum and nitrogen levels

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) >40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

We manufacture and supply bar stock for machined, forged and cold formed Duplex 2205 Nuts. We can manufacture and supply Duplex 2205 nuts in imperial sizes from M2 to M150 and 1/4″ to 6″. The most commonly used nuts are heavy hex nuts, flange nuts, cap nuts, set nuts, etc. We can supply these duplex 2205 nuts with minimal lead time.

Grade 904L is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. This steel grade needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments

The ASTM A182 F51 flanges refer to standard or non-standard flanges manufactured in accordance with ASTM A182 Grade F51, which is designated with UNS number S31803.

The duplex structure results in improved stress-corrosion cracking resistance, compared with the austenitic stainless steels, and improved toughness and ductility, compared with the ferritic stainless steels.

UNS S32205 dual-phase steel round bar has excellent resistance to chloride stress corrosion cracking, high strength, can withstand brackish water or salt water impact, and high surface toughness.

Cold drawn and cold rolled is the primarily prepare for 2205 Duplex Stainless Steel Pipe. Due to the material characteristic of high quality and hardness, duplex steel is more difficult to process than austenitic steel. It is very easy to damage, particularly for small thickness and large diameter pipes, it incorporates a long and hard-working methods.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

The equivalent proportions of their existence make it possible for the alloy to express qualities reminiscent of each steel type. Take austenitic steels, where the most basic grade, like 790 steel duplex pipe, has substantial corrosion resistance properties.

The duplex microstructure allows this grade of high strength super duplex UNS S32750 bar to have a lower coefficient of thermal expansion and higher thermal conductivity than austenitic steels and is suitable for operating temperatures up to 300¡ãC.

2507 is also used in Flue Gas Scrubbing Equipment, Pulp and Paper Mill Equipment, Offshore Oil production/technology and Oil and gas industry equipment.

S32750 Seamless Pipes are chromium and molybdenum mixtures with high resistance to pitting. Many industries prefer these Seamless Pipes for their resistance to stress corrosion cracking and crevice corrosion.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

ASTM A815 UNS S32205 Long Radius Elbow is used in turning pipe direction and is also resistant to chloride and sulfide environments. These ASME B16.9 Duplex Stainless Steel Seamless Fittings have a higher chromium content.

The duplex steels are one type of stainless steels that have ferritic and austenitic phases in their metallurgic microstructure.

S32750 is used for marine applications, flue gas scrubbing equipment, and pulp & paper mill equipment.

Super Duplex stainless steel offers the same advantages as its Duplex counterpart. The main difference between the two is that Super Duplex has a higher chromium and molybdenum content, resulting in increased corrosion resistance.

2507 has Good general corrosion resistance, Suggested for applications up to 600¡ã F, and Low rate of thermal expansion.

This provides the flanges with high corrosion resistance and higher mechanical properties. Please contact us for your orders of F53 flanges.

Duplex 2205 was tested under reverse bending stress at room temperature compared to SS316. The results show that Duplex 2205 has approximately twice the fatigue limit/yield strength.

ASTM A479 Duplex Stainless Steel 1.4462 Punched Washers has resistance to SCC that is of prominence in a lot of applications counting hot water tanks, brewing tanks, desalination plant and process plant. Accordingly, ASTM A479 Duplex Stainless Steel UNS S31803 Lock Washers shows properties of both ferritic and austenitic alloys. Microstructures of ASME SA 479 Duplex Steel UNS S32205 Flat Washers include a combination of ferrite and austenite stages. ASTM A479 Duplex Steel UNS S31803 Washershas outstanding general corrosion resistance in a widespread range of corrosive chemicals containing industrial and seawater acids.

The mechanical strength, corrosion resistance and low temperature toughness of the ASTM A182 F53 Flanges is higher than that of ordinary duplex stainless steels.

Zeron 100 Threaded Rod are available in hot forged,cold forged and bar stock machined conditions depending upon the order quantity.SA 182 F55 is a forging grade of Alloy 32760 or UNS 32760 which is highly resistant to crevice corrosion and pitting alloy for variety of corrsives. It is 22% chromium duplex stainless steel.

Super Duplex Stainless Steel is known to have better stress corrosion, cracking resistance and mechanical properties than any other type of steel.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Phase stainless steel UNS S31803 fasteners exhibit the properties of austenitic and ferritic stainless steels. UNS S31803 dual phase steel fasteners have high strength, good resistance to sulfide stress corrosion and excellent impact toughness.

The material for UNS S32760 Stud Bolts is about 10% lighter when compared to grade 316 stainless steel. The Stud Bolt S32760 demonstrates high performance at cryogenic temperature settings as well. Which means that the ASTM A1082 UNS S32760 has good sub-zero notch ductility properties down to a temperature of minus 50¡ãC.

ASTM A479 Super Duplex UNS S32750 Fasteners is a mixed microstructure of austenite and ferrite (50/50) which has improved strength over ferritic and austenitic steel grades.

The idea of duplex stainless steels dates back to the 1920s with the first cast being made at Avesta in Sweden in 1930. However, it is only in the last 30 years that duplex steels have begun to ¡°take off¡± in a significant way. This is mainly due to advances in steelmaking techniques particularly with respect to control of nitrogen content.
Type “Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size “OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”

Duplex Steel S32205 bar stock is a ferritic, duplex, austenitic 3% molybdenum, 22% chromium and 5% – 6% nickel alloy stainless steel.

Our Duplex Steel S31803 bar is an industrially processed nitrogen-modified steel that addresses common corrosion problems encountered with 300 series stainless steels.

UNS S31803 Bolt is a threaded fastener with external threads. Generally, like screws, alloy S31803 bolts tend to use a variety of head designs.

2205 has excellent corrosion properties, and it is well-suited to environments containing chlorides and hydrogen sulphide, for use in oil and gas extraction from sour wells, in refineries and in process solutions contaminated with chlorides.

Super Duplex UNS S32760 is one of the most common super duplex grades on the market. UNS S32760 is a duplex stainless steel designed for use in corrosive chlorine-containing environments, with the addition of W and Cu compared to UNS S32750.