Din2566 3 Vented Blind Disc Plate Double Threaded For Pipe Weld Neck Flange A150n

Hastelloy C2000 is available in a variety of sizes and thicknesses, this type of nickel-chromium-molybdenum alloy is renowned for its superior strength and corrosion resistance.

The pipes of seamless configurations have higher load-bearing capacity and strength over other grades.

UNS N08367 also commonly referred to as alloy AL6XN is a low carbon, high purity, nitrogen-bearing “super-austenitic” nickel-molybdenum alloy with excellent resistance to chloride pitting and crevice corrosion.

ASME B36.19M is the standard specification for stainless steel pipes, which specifies the dimensions, tolerance, and manufacturing requirements for both welded and seamless pipes.

It is widely used in offshore oil and gas exploration/production and in heat exchangers in petrochemical/chemical processing.

This provides greatly enhanced resistance to sulfuric acid. It also has a high chromium content, to maximize its resistance to oxidizing chemicals and process streams contaminated with ferric ions and dissolved oxygen.

Titanium’s density is about 60% that of stainless steel and nickel alloys, this weight saving makes it a popular choice in applications where this is critical such as aerospace.

Hastelloy Alloys Directory
The Corrosion Resistant HASTELLOY alloys are widely used by the chemical processing industries. The need for reliable performance leads to their acceptance and growth in the areas of energy, health and environmental, oil and gas, pharmaceutical and flue gas desulfurization industries.

SCH40 Monel 400 Pipe is designated as Werkstoff Number 2.4360 and UNS N04400. Alloy 400 Pipe also known as Monel Alloy 400 Pipe, Monel 400 Pipe & Nickel Alloy 400 Pipe.

AL6XN is a superaustenitic stainless steel with outstanding resistance to chloride pitting, crevice corrosion and stress corrosion cracking. AL6XN is a 6 moly alloy that was developed for and is used in highly aggressive environments. It has high nickel (24%), molybdenum (6.3%), nitrogen and chromium contents that give it excellent resistance to chloride stress corrosion cracking, chloride pitting, and exceptional general corrosion resistance. AL6XN is primarily used for its improved pitting and crevice corrosion resistance in chlorides. It is a formable and weldable stainless steel.

Nickel-copper-based alloy 400 Monel 2.4360 cold drawn rod is virtually immune to chloride stress-related corrosion cracking when exposed to corrosive media in typical environments. Monel 400 is a copper and nickel based alloy that is popular today due to its high performance. The alloy has excellent acid and alkali resistance. In addition, it has good tensile strength, ductility, excellent thermal conductivity, and can be hardened by cold work. Additionally, it can be used in applications with temperatures ranging from minus to 538 degrees Celsius.

Inconel 600 round bar is a nickel-based alloy with benign carburization and excellent corrosion resistance at high temperatures. Inconel 600 round bars are effective against drying Cl2 and many other different gases at mild and high temperatures. Alloy 600 bar is a nickel-chromium alloy with good oxidation resistance and resistance to chloride pressure decomposition cracking, high cleanliness water corrosion and acid oxidation at elevated temperatures.

Common Trade Names: Nickel Alloy 36, Invar 36®, Nilo 6®, Pernifer 6®
Invar 36® is a nickel-iron, low expansion alloy that contains 36% nickel, Invar 36 has a low coefficient of expansion from cryogenic temperatures to about +500°F (260°C).
Invar 36 Tube OD:0.2-6mm, WT: 0.02-2mm

Inconel 600 seamless tubes of standard UNS N06600 and ASTM B167 are the ones manufactured to sustain excessively high pressure and come with great warranty.

ASTM A312 TP316 is a standard specification for seamless, straight-seam welded, and heavily cold worked welded austenitic stainless steel pipes used in high-temperature and general corrosive service applications. The 316 Seamless Industrial Steel Pipe is made from a combination of chromium, nickel, and molybdenum, which gives SS 316 Seamless Tube excellent resistance to corrosion and rust.

A789 UNS S31803 and UNS S32205 are two grades of duplex stainless steel that are widely used in various industrial applications. These Duplex S31803 Seamless Pipes are known for their excellent corrosion resistance, high strength, and good weldability. A789 is a specification that covers seamless and welded tubes made from duplex stainless steel.

The 316 stainless steel pipe has become an indispensable material for the industrial sector. This alloy of iron and chrome is recognized for its high resistance to corrosion, as well as its durability. 316 stainless steel tubing can be produced in both seamless and welded tubes to meet specific customer needs.

Nickel Alloy 400 and Monel 400, also known as UNS N04400, is a ductile nickel-copper-based alloy consisting primarily of two-thirds nickel and one-third copper. Nickel Alloy 400 is known for its resistance to a variety of corrosive conditions, including alkalis (or acids), salt water, hydrofluoric acid, and sulfuric acid. Since Monel 400 or Alloy 400 is a cold worked metal, this alloy has high hardness, stiffness and strength. By cold working ASTM B164 UNS N04400 bar stock, the alloy is subjected to higher levels of mechanical stress, which in turn causes changes in the alloy’s microstructure.

Inconel 625 Coil is characterized by its excellent resistance to oxidation, high-temperature corrosion and fatigue. ASTM B443 UNS N06625 Inconel Plate is widely used in the aerospace, chemical processing and oil and gas industries due to its superior strength, toughness and durability even in extreme environments.

Nickel based 800 Incoloy Hexagonal Pipe is known to have a good resistance to corrosion. Specifically speaking, the Incoloy 800 Pipe offers sufficient resistance against both carburization as well as oxidation corrosion.

Higher chromium, molybdenum and nitrogen content results in a Pitting Resistance Equivalent Number (PREN) >40, providing superior pitting and crevice corrosion capabilities to austenitic and duplex stainless steels in virtually all corrosive media, and critical pitting temperature Above 50¡ãC .

ASTM A240 Type 2205 Plate is a duplex stainless steel plate that is used extensively in various industries such as chemical processing, oil and gas exploration, and marine engineering. SA 240 GR 2205 Sheet is made from grade 2205 stainless steel, which is a combination of ferritic and austenitic steel.

Nickel 200 flanges The Nickel 200 Flanges are durable, dimensionally stable, and have a fine finish. Moreover, the ASTM B564 UNS N02200 Blind Flanges are resistant to corrosion in neutral and oxidizing environments, making them perfect for use in food handling equipment.

Inconel 718 is a nickel-chromium-based alloy that is commonly used in high-temperature applications such as aerospace and gas turbines. One of the most important factors in the production of ASTM B670 Inconel 718 Sheet is the plate rolling process. There are two main types of Inconel 718 plates available on the market: hot rolled and cold rolled plates.

Alloy 800 is a nickel-iron-chromium alloy with high strength and excellent resistance to oxidation and corrosion at high temperatures. ASTM B407 UNS N08800 Incoloy 800 W. Nr. 1.4876 Welded Pipe is widely used for construction of equipment requiring corrosion resistance, heat resistance, strength, and stability for service up to 1500°F (816°C).

Nilo Alloy 36, W.Nr 1.3912, Invar 36® is a nickel-iron, low controlled expansion alloy that contains 36% nickel and possesses a rate of thermal expansion approximately one-tenth that of carbon steel.
Invar 36 Specifications: UNS K93600, W.Nr 1.3912

Incoloy 800H Flange We have a strong reputation in the industry for producing high-quality flanges of different types that would suit the requirements of our clients. We manufacture Incoloy 800 Flanges which are reliable and high in quality. We use premium resources and advanced machinery for producing ASTM B564 UNS N08800 Incoloy 800 Flanges.

It demonstrates good resistance to neutral and reducing environments. This alloy creates a tenacious oxide, protective film that does not spall off, but it retains superior oxidation resistance at soaring temperatures.

Hastelloy C2000 Tubes are used in a broad range of industries including petrochemical processing, chemical processing equipment manufacturing, oil refineries and power plants.

316L 1.4401 S31603 Stainless Steel Pipe is a highly versatile and durable pipe option commonly used in a wide range of industrial and commercial applications. This SS UNS S31603 pipe is made from high quality 316L stainless steel with excellent resistance to corrosion, oxidation and staining, making it ideal for harsh environments or high stress applications.

We offer F9 Alloy Steel Flanges that have superior corrosion resistance and ductility due to the small amount of Chromium and Molybdenum. A182 F9 Alloy Steel Flanges is for use in small size and high pressure piping systems. Due to the small amount of chromium and molybdenum it has superior corrosion resistance and ductility.

The ASME SB564 Alloy 825 Slip On Flanges connect seamless pipes in precision locations by slipping on to the pipes. These are useful in precision applications like instruments and machineries. The ASTM B564 Incoloy 825 Threaded Flanges are used where welding is not preferred or it is not possible.

ASTM A276 Type 316Ti is a material grade specification for 316Ti stainless steel cold-worked or hot-worked bar in round, square, hexagonal, and other hot-rolled extruded shapes. Alloy 316Ti studs do show surface corrosion, usually as a brown staining, which is particularly relevant for cracks and rough surface finish. The low thermal conductivity of austenitic alloys such as 316Ti studs causes heat to concentrate on the cutting edge, which means that coolants and lubricants are required and must be used in large quantities.

These are available in different types and grades such as Monel 400 Forged Threaded Elbow, Nickel 200 Forged Threaded Equal and Unequal Tee, Inconel 600 Threaded Equal and Unequal Cross, Incolloy 800 Threaded Half and Full Threaded Fittings, UNS S4400 Threaded Reducers, UNS S2201 threaded caps, Hastelloy C276 threaded reducing inserts, etc.

Grade 904L is less resistant to nitric acid than grades 304L and 310L, which are free of molybdenum. This steel grade needs to be solution treated following cold working, to achieve maximum stress corrosion cracking resistance under critical environments

These A234 WPB B16.9 Elbows are used in pipe system construction. We are manufacturing ASTM A234 WPB Elbow from pipes using “mandrel” method which allows the pipe to expand and bend simultaneously.

ASTM A269 Alloy 254 Seamless Pipe Material is a very high end austenitic stainless steel.

Type 316 stainless steel is an austenitic chromium-nickel stainless steel and heat-resistant steel that has excellent corrosion resistance compared to other chromium-nickel steels when exposed to a variety of chemical corrosives such as seawater, brine solutions, etc.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.44

Alloy 600 is relatively immune to most neutral and alkaline salt solutions and is used in some corrosive environments. The alloy is resistant to steam and mixtures of steam, air and carbon dioxide.

STAINLESS STEEL 317L FLANGES, 317L STAINLESS STEEL FLANGES, SS 317L FLANGES, ASTM A182 UNS S31703 FLANGE, ASTM A182 F317L, ASME SA182 F317L FLANGES MANUFACTURER IN INDIA.
Savoy Piping Inc., is an ISO 9001:2015, PED/27/EC and OHSAS 18001:2007 Approved Manufacturer of Stainless Steel 317L Flanges in Specification ASTM A182 F317L and Types Like 317L Weldneck Flange, 317L Blind Flange, 317L Socketweld Flange, 317L Slip On Flange, 317L Threaded Flange, 317L Laped Joint Flange, 317L Screw Flange, 317L Plate Flange, 317L WNRF Flange, BLRF Flange, SWRF Flange, 317L SORF Flange etc.

The exceptional corrosion resistance of C22 has promoted its use in many different markets wherever harsh environments are encountered, including the chemical process, pharmaceutical, food processing, oil and gas, power generation, and the paper industries.

Stainless steel is an alloy of iron that is resistant to rusting. It contains at least 11% chromium and may contain elements such as carbon, other nonmetals and metals to obtain other desired properties. Stainless steel’s resistance to corrosion results from the chromium, which forms a passive film that can protect the material and self-heal in the presence of oxygen.
A stainless steel pipe system is the product of choice for carrying corrosive or sanitary fluids, slurries and gases, particularly where high pressures, high temperatures or corrosive environments are involved. As a result of the aesthetic properties of stainless steel, pipe is often use in architectural applications.

This is what makes 316 ss pipe an ideal grade for applications such as pumps, valves, textile and chemical equipment, pulp and paper, and marine applications.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.61

A193 B7 Cadmium Plated stud bolts are made of alloy steel for high temperature environments. ASTM standards cover alloy steel and stainless steel bolting materials; this specification covers fasteners for pressure vessels, valves, flanges, and fittings.

MONEL? alloy K-500 (UNS N05500 / W.Nr. 2.4375) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base.

Hastelloy B2 pipe bend provides resistance to pure sulfuric acid and a number of non-oxidizing acids. The alloy should not be used in oxidizing media or where oxidizing contaminants are available in reducing media.

Compared to conventional stainless steels, duplex steel pipes guarantee higher resistance to pitting and stress corrosion cracking. Meanwhile, our ASTM A 789/A 790 Duplex Steel Pipes and Tubes are available in different sizes, gauges and thicknesses according to customers’ customized requirements.

La aleacion C276 se considera una de las listas de productos de superaleaciones. Las superaleaciones (o metales especiales) se utilizan en entornos hostiles debido a su capacidad para manejar condiciones corrosivas.

Incoloy Alloy 800 Round Rods are used in a wide range of applications such as nitric acid catalyst supports, reformer outlet pigtails and manifolds, heat exchangers, pressure vessels and dampers. Our products are developed through market research and are sustainable in changing market trends. Incoloy 800 Bars is another nickel-chromium alloy that is resistant to high temperatures and corrosion.

Hastelloy C276 grade round bars can be used in FGD systems due to their excellent resistance to sulfur-containing compounds and chloride ions encountered in most scrubbers. Alloy C276 Hastelloy bar also has excellent resistance to localized corrosion such as pitting, and the alloy is resistant to stress-related corrosion cracking. Hastelloy C276 N10276 Bright Bar is also one of the few materials that can withstand the corrosive effects of chlorine in the form of wet chlorine gas, hypochlorite and chlorine dioxide.

SS 304 Forged Fittings and SS 304L Forged Fittings products are ideal for various industrial applications, such as gas pipelines, condensers, and nuclear applications. Stainless Steel 304 Forged Fittings have excellent mechanical properties.

Inconel Alloy 718 Flanges, which is oxidation resistant throughout its useful temperature range. Machining of our Inconel 718 Slip On Flanges should be rigid and overpowered as much as possible.

The reason ASTM B637 UNS N07718 bolts are ideally chosen for the manufacture of turbine engines. Since a turbine engine operates on basic thermodynamic principles, the efficiency of a turbine engine increases as the turbine inlet temperature increases.

The ASME B16.5 standard covers steel pipe flanges and flanged fittings from NPS 1/2 to NPS 24 metric/inch pressure classes 150 to 2500.

ASTM A182 F309H Stainless Steel Flanges products are designed and developed in accordance with international quality standards and national quality standards.

Since stainless steel 309 studs have met all the challenges of providing quality, timely, cost-effective solutions for fastener applications. Every product of Grade 309 SS Bolts is designed to your requirements and specifications.

Inconel 625 Pipe is a nickel chromium super alloy pipe that is made up of 58% nickel, 20% chromium, carbon, manganese, silicon, iron, sulfur, aluminum and titanium in the composition. The pipes are highly corrosion resistant. Navstar Steel is a leading manufacturer and supplier of the Inconel 625 Pipe and tubes. The material has 517MPa minimum yield strength and 930MPa minimum tensile strength.
Type Seamless Pipe
Seamless Tube
Welded Pipe
Welded Tube
SAW LSAW ERW EFW
Beveled End, Plain End”
Size OD: 1/2″” ~48″”
Thickness: SCH5~SCHXXS
Length :As per your requirement.”
Manufacturing technique Hot rolling /Hot work ,Cold rolling
Producing Standard ASME B36.10 ASME B36.20

1.4529 German numeral code. Is a super duplex stainless steel, the main components: 20Cr-25Ni-6Mo-1Cu-0.2N corresponding to the United States: N08926, 254SMo…
1.4529 (UNS N08926) has very high resistance to pitting and crevice corrosion in halide media and in acidic environments containing sulfur and hydrogen
It can effectively resist chloride ion stress corrosion, and also has good corrosion resistance and good stability in oxidizing and reducing media.
The mechanical properties are slightly better than 904L, and it can be used in the manufacture of pressure vessels from -196 to 400 ¡ãC.

Steel pipes can be disintegrated on the basis of its application. Typical applications of steel pipes are in the area of water pipelines, industrial water lines, oil pipe lines, cross country pipe line,agriculture and irrigation pipes, tube lines for natural gas, chemical industries, automobile industry, construction industries and other purposes.

Typical applications for steel include: food preparation equipment, laboratory equipment, chemical containers for transportation, springs, heat exchangers, mining screens, coastal building paneling, railings, trim, marine fittings, quarrying and water filtration. One of the main differences between 316l stainless steel and 316 stainless steel is that the carbon content of the former is as high as 0.03%, and the carbon content of the latter is as high as 0.08%. These differences give them different properties. Let’s learn more about the 316l stainless steel alloy.